Artmore Multi-Purpose Mould Release Agent Spray - Best for Polyurethane Resin

 Multi-Purpose Mould Release Agent Net: 450ml

Suitable for:
Thermosetting Resins: Epoxy resin, Unsaturated polyester, Phenolic resin, Acrylic resin, Organosilicon resin
Thermoplastic Resins: PE, PP, PVC, PS, ABS, PC, PA, POM, PET, FR Fluororesin, etc.
Polyurethane Resins: TPU, MPU, CPU, Polyurethane elastomer
Rubber and Silicone: SBR, NBR, EPDM, CR, FKM, TPR, Q silicone rubber
Other Materials: Carbon fiber, Synthetic resin composite, etc.
Flash Point: -4°C, Boiling Point: 80°C,
High Temperature Resistance: 550°C,
Film Thickness: 0.1um, Zero Transfer, No Residue.

Best for Polyurethane Resin

For industrail use only. Oil-Base.

DANGER: FLMMABLE AEROSOL. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED.
Keep away from fire/heat/sparks/open flames/hot surfaces, no smoking, don’t spray on an open flame or ther igition source. Protect from sunlight. Don’t expose to temperetures exceeding 50 °C. Pressuried container: don’t pierce or burn even after use. May be fatal if swallowed and enters airways. Do not ingest. May cause drowsiness or dizziness,. Avoid breathing dust/flume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. Causes skin irriation. Wash thoroughly after handing. Wear eye and skin protection.

FIRST AID:
Swallowing: Do not induce vomitting; call for medical help immediately.
Inhalation: Move patient to fresh air, if symptoms persist consult a doctor.
Skin Contact: Immediately wash with water and soap and rinse thoroughly.
Eye contact: Rinse opened eyes for several minutes under running water. If symptoms persist consult a doctor.