Start your Ecrylimer journey with a 1.75kg Pack - Includes 0.5kg Liquid and 1.25kg of Base Powder (1:2.5 ratio)
More to make? Grab a 3.5kg Pack - Includes 1kg Liquid and 2.5kg of Base Powder (1:2.5 ratio)
The 7kg isjust perfect for easy to use sizes and come in a handy tub.
Meet your new favourite 2-part composite! Ecrylimer is Australia’s most advanced, virtually bubbleless eco casting compound formula, delivering buttery smooth results on both sides with minimal sanding every time!
Cleaning
-
Easy clean up of molds etc with soapy water or sugar soap wipes before it sets
SMOOTH POUR | FEWER BUBBLES | NO SANDING | CAN BE HAND MIXED EASILY
- ENJOY AN Australian INDUSTRY-LEADING FORMULA with a buttery smooth pour with virtually no bubbles for a super-smooth set on both sides with minimal sanding
-
DEMOLD in 30-40 minutes or less but get a LONGER WORKING TIME to be more creative.
-
INCLUDES smoothing additive
- EXPERIMENT FEARLESSLY with new design ideas. Ecrylimer is an easy-to-use, pigment-friendly eco casting composite that lets you get more done, faster
- TRY THE STARTER PACK TODAY and get everything you need in one convenient 1.75kg package ââ‚?get into your flow and start creating with no limitations!
How To
* Measure between a 2.1:1 to 2.5:1 ratio of powder to liquid (if you are starting out we recommend 2:1). Ie 50g of liquid and add 100g of powder.
* Add a few drops of pigment
* Hand mix for 1-2 minutes, or mechanically mix for 1 minute (mechanical mixing is the best for pigment dispersion.
* Tap the bottom of the container on the table a few times to get the bubbles to surface and pop.
* Leave to settle for 2-3 minutes
* Give a couple of gentle swirls and pour into your mold,
* Wait 30 minutes (40 for enclosed molds) and demold.
